deoxidizing
英
美
网络 脱氧; 去氧
双语例句
- The preparation of ultrafine WO_3 powders and the deoxidizing and carbonizing of WO_3 to WC were studied. Well abrasive resistant metal composite coating strengthened by ultrafine WC particles was prepared by flame thermal spray method and abrasive wear property was studied.
本文探索了超细WO3粉的制备及其还原碳化为WC粉的方法，采用火焰热喷涂工艺，制备了耐磨性能较好的超细WC陶瓷&金属复合涂层，并研究了涂层的耐磨性能。 - The composition of the secondly and thirdly deoxidizing products can be controlled through controlling the content of aluminum and calcium of the strong deoxidizing elements, making them have good distortion ability in hot work.
二次和三次脱氧产物的成分可以通过控制钢液中强脱氧元素铝和钙的含量来控制，使它们具有良好的热加工变形能力。 - Titanium powders produced by deoxidizing TiO2 directly is the mainstream, if we can empolder a kind of more simple and lower cost method to produce Titanium powders, it will certainly stimulate the development of Titanium production industry.
采用TiO2直接还原法生产钛粉已经成为生产钛粉的主要研究方法，如果能开发出更简单、成本更低的方法必将极大地促进钛粉生产行业的发展。 - GC is used in the processing of various resins and deoxidizing agent as well.
同时绿碳化矽也用于各种树脂和脱气处理。 - The results of this study are significant for the use, deactivation and reactivation of Co-Mo/ γ-Al2O3 deoxidizing catalyst.
研究结果对Co-Mo/γ-Al2O3非贵金属耐硫脱氧催化剂的使用、失活和再生有重要的意义。 - R.F. Mushet contributed the technique for deoxidizing the converted metal that made the process a success.
穆谢特又提供了将转变后的金属退氧化的技术，使该过程得以成功。 - The processes such as slag making, desulfurizing, deoxidizing and controlling cleanness of steel in LF are analyzed and optimized.
分析了LF炉的造渣、脱硫、脱氧、氩气搅拌、钢液纯净度控制等工艺制度。 - The size of deoxidizing products increases with the increased degree of supersaturation of deoxidizing elements;
脱氧产物尺寸随脱氧元素过饱和度增加而增加； - The deionizing and deoxidizing water is required by the methylene blue spectrophotometric method in the new national standard to analyze sulfide in water and waste water.
在新颁国标中，采用亚甲基蓝光度法测定水和废水中硫化物时，要求用去离子除氧水做为实验用水。 - We applied the thermodynamic principle to analyze the thermodynamic condition for deoxidizing the oxide of Si-Mn. According to our result, we designed a new technigue, the surface of water-atomized Si-Mn steel powder deoxidized in pure N2 with thermoset resin.
本文用热力学原理分析了Si-Mn氧化物还原的热力学条件，并根据其热力学分析结果，对水雾化Si-Mn钢粉采用热塑性树脂涂层，在高纯氮气氛中进行脱氧的新工艺研究。